Creating your first trousers with AI – Hem Opening
You are creating your first LE CHEMISEUR® trousers with our AI and would like to check the hem opening? This page is for you.
Best practice
Regular Fit | Tailored Fit (recommended) | Slim Fit |
|---|---|---|
| | |
If you chose the Regular Fit, the hem opening has been widened by 1 cm. This gives a dressier twist, that is coming back into fashion. | Modern and dynamic, this close-to-the-body width suits most situations. | If you chose “Slim Fit”, the AI has tightened the hem by 1 cm. This creates a more casual style. |
When to adjust
❌ Do not taper too much!
The fabric is slightly stretch, but it will not allow a skin-tight cut: keep at least 17 cm so your foot can pass comfortably. You may go down to 16 cm if your shoe size is under 43.
🥾 If you wear boots
To ensure the trousers can sit over your footwear, add 1 cm.
📏 You are short
We recommend tapering the hem to create visual length. The AI has already taken this into account, but you can still remove 1 cm if you wish. Remember to do the same at the knee so the leg remains balanced.
🪜 You are tall and slim
Widen the hem to give visual breadth. The algorithm has already considered this, but you can still add 1 cm or even 2 cm at the hem. Do the same at the knee for a balanced silhouette.
🔵 Plus sizes
The AI has also adjusted for this, but you may add another 1 cm at the hem to create a visually balanced cut if you prefer.
Compare with trousers you already own
Updated on: 12/06/2025